Minimum Order Quantity | 1 Kg |
Material | ALUMINIUM 5083 |
Brand | METALFORT 5083 |
Grade | 5083 H1116 |
Alloy | With Alloy |
Surface Treatment | GOOD |
Dimensions | 2 MM TO 50 MM THK |
Weight | 10 KG 10000 KG |
Model Name/Number | METALFORT 5083 H1116 INDIA |
5083 aluminium alloy is an aluminium alloy with magnesium and traces of manganese and chromium. It is highly resistant to attack by seawater and industrial chemicals.[1]
Alloy 5083 retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys with an Ultimate Tensile Strength of 317 MPa or 46000 psi and a Tensile Yield Strength of 228 MPa or 33000 psi. It is not recommended for use in temperatures in excess of 65 °C.[2]
1000 series (Pure) |
|
---|---|
2000 series (+Cu) |
|
3000 series (+Mn) |
|
4000 series (+Si) |
|
5000 series (+Mg) |
|
6000 series (+Si+Mg) |
|
7000 series (+Zn) |
|
8000 series (Misc.) |
|
Material | Aluminum Alloy |
*Your information is safe with us.
Stainless Steel TP 304L Seamless Pipe
Steel tubes in India
ASTM A312 TP 304L SS Seamless Pipes Suppliers, 304L Pipe Distributor, 304L Cold Drawn Pipes Stockholder, SS 304L Pipes Exporter In India.
METALFORT is one of the renowned Exporter, stockist, stock holder and supplier of a qualitative range of Stainless Steel 304L Seamless Pipes that are being designed as per the national and international standard quality of raw materials. To meet the quality conscious needs for our highly esteemed clients, we provide Stainless Steel 304L Pipes in different sizes, shapes, thickness and standards as per customized requirements given by our customers.
Stainless Steel 304L Cold Drawn Pipes have been fabricated in such a way so as to acquire new high points in the industrial front. SS 304L Pipes are used in one of the best range of varied industrial purposes and also used to connect pipes for most of the part.
Stainless Steel DIN 1.4306/1.4307 Seamless Pipes Stockist, SS UNS S30403 Seamless Pipes, Stainless Steel 304L Cold Drawn Pipes, JIS SUS 304L Seamless Pipes, Stainless Steel 304L Seamless Pipes In India.
Types Of Stainless Steel Seamless Pipes· Stainless Steel 304L Seamless Pipes
· SS TP 304L Seamless Pipes
· Stainless Steel 304L Pipes
· SS 304L Pipes
· Stainless Steel 304L Cold Drawn Pipes
· ASTM A 312 304L Stainless Steel Seamless Pipes
· Stainless Steel 304H Seamless Pipe
· SS TP 304L Cold Drawn Pipes
· AISI SS TP 304L Pipes
· Stainless Steel 304L Pipes
· SS UNS S30400 Seamless Pipes
· Stainless Steel 304L Seamless Pipes
· DIN 1.4306 / 1.4307 Stainless Steel 304L Seamless Pipes
· Stainless Steel 310S Seamless Pipe
*Your information is safe with us.
We are the Leading Supplier of Stainless Steel Channels in Industry, To know more Please Share your Enquiry with us
Minimum Order Quantity | 5 Kg |
Material | ALUMINIUM |
Usage/Application | Manufacturing |
Single Piece Length | 1000 |
Tempered | T4 |
Shape | ROUND |
Surface Finish | ALUMINIUM FINISH |
Aluminium / aluminum combined with various percentages of other metals such as copper, manganese, magnesium, and chromium form the aluminium / aluminum alloys.
Chemical Composition
The following table shows the chemical composition of aluminium / aluminum 2117-T4 alloy.
Element | Content (%) |
---|---|
Aluminum, Al | 94.3 - 97.6 |
Copper, Cu | 2.2 - 3 |
Silicon, Si | ≤ 0.80 |
Iron, Fe | ≤ 0.70 |
Zinc, Zn | ≤ 0.25 |
Magnesium, Mg | 0.20 - 0.50 |
Manganese, Mn | ≤ 0.20 |
Chromium, Cr | ≤ 0.10 |
Other (each) | ≤ 0.050 |
Other (total) | ≤ 0.15 |
The physical properties of aluminium / aluminum 2117-T4 alloy are outlined in the following table.
Properties | Metric | Imperial |
---|---|---|
Density | 2.75 g/cm³ | 0.0994 lb/in³ |
Melting point | 554 - 649°C | 1030 - 1200°F |
The mechanical properties of aluminium / aluminum 2117-T4 alloy are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 296 MPa | 43000 psi |
Yield strength | 165 MPa | 24000 psi |
Elongation at break (@diameter 12.7 mm/0.500 in) | 27% | 27% |
Poisson’s ratio | 0.33 | 0.33 |
Elastic modulus | 71 GPa | 10300 ksi |
Shear strength | 193 MPa | 28000 psi |
Hardness, Brinell (@load 500 kg; thickness 10.0 mm) | 70 | 70 |
Hardness, Knoop (converted from Brinell hardness value) | 93 | 93 |
Hardness, Vickers (converted from Brinell hardness value) | 81 | 81 |
Machinability | 50 | 50 |
The thermal properties of aluminium / aluminum 2117-T4 alloy are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@20-100°C/68-212°F) | 23.8 µm/m°C | 13.2µin/in°F |
Thermal conductivity | 154W/mK | 1070 BTU in/hr.ft².°F |
Equivalent materials to aluminium / aluminum 2117 alloy are:
Machinability of aluminium / aluminum 2117 alloy is good in the T4 condition; however machining is difficult in the annealed condition. The use of oil lubricant is recommended for all processes. This alloy has very good workability with hot and cold working. Hot working should be performed at 426-343°C (800 to 650°F). Both should be performed with the alloy in T4 or O (annealed) conditions.
Welding of aluminium / aluminum 2117 alloy can be performed using TIG or MIG methods. It is recommended that the filler rod be of the same alloy. Forging should be carried out 521-343°C (970-650°F). Likewise annealing should be performed at 412°C (775°F) for 3 h followed by controlled cooling at 10°C (50 °F)/h down to 260°C (500 °F). Finally, it should be air cooled.
ApplicationsAluminium / aluminum 2117 alloy is chiefly used in the manufacture of a variety of mechanical fasteners among other products. It is also used for making rivets.
*Your information is safe with us.